Electronic Components
3.3v-12v Control PnP Mosfet Module
3.3v-12v Control PnP Mosfet Module 5v-36v Arduino / Raspberry Pi Board uses opto isolated, completely separated from the 2-terminal voltage. Input is controlled by a 2 pin control ,a ground control can be directly connected to the control switch. Control current 1-5mA control voltage is different, the current difference is mainly the loss on the LED. If load exceeds 5A a heat sink will need to be added Maximum 22Amp (Use pwm as part of your thermal control for this module). Board with LED lights Host input and output screw terminal block Control terminal using 2.54mm pin, easy wiring. Control can be directly connected microcontroller IO. MCU can for ARDUINO PWM control motor speed, the brightness of lights and so on.
- Code
- Questions & Answers
- Specifications
No code has been added for this product
If you need code for the 3.3v-12v Control PnP Mosfet Module then please contact us at tech@automationbros.com.au and we'll get it here as soon as possible.
3.3v-12v Control PnP Mosfet Module
Input control voltage: 3.3V-12V Output charged voltage: 5V - 36V Note that large current need to add additional heat sink Board size: 4.2 X 2.6 cm
